IMAR Multi-Purpose Marine Cleaner #501 is packaged full strength in the bottle. It can be diluted as much as 1 part cleaner to 20 parts water depending on the area to be cleaned. Once you have determined the strength you desire apply to the surface being cleaned. For heavily soiled areas the cleaner can sit up to 5 minutes on the surface and a stiff bristle brush can be used. (always use in a non- conspicuous location to determine if leaving the product or a brush will cause harm to the surface.) Once area is cleaned either flush area with clean water (outside) or wipe surface clean (inside) as location of surface may dictate. Once dry, follow with IMAR Vinyl and Rubber Protectant.
IMAR Rubber and Vinyl Protectant #502 will restore luster and extend the life of vinyl and rubber surfaces. Simply spray surface of vinyl or rubber that has just been cleaned and apply with a soft cloth or sponge. Allow surface to dry before using. Be sure surface is clean before applying protectant as product will bond to the surface trapping any dirt that has not been properly removed first.